MAN 8x8 off-road Personnel Carrier / Tour or Safari Vehicle
ID: 332 Ref MOD: 32914
Location: DN10 6ET, Doncaster, The UK
Units Available: 1
Mileage Hrs/Kms: 0 kms
Year of Manufacture: 2018
The price: P.O.A.
The OVERLANDER MAN 8x8 2.9mtr was developed by MAN trucks to accommodate loads with high centres of gravity.
The high ground clearance for rough terrain coupled with the wider axles makes this vehicle well suited to the (as in this case) the construction of a bespoke body to accommodate up to 38 passengers in air conditioned comfort.
We will make your every fantasy come true.
This particular example incorporates a number of bespoke features including:
Webasto heater system
Custom Fit Extra Large Tyres
Reversing and Internal Cabin Camera`s
These vehicles are constructed to the highest standards and this is reflected in the construction price so only seriously interested parties should apply for details.
They are for the most part a cheaper option for overlander buyers since an older low mileage
8x8 chassis provides several benefits which are:
Lower build cost
Easier to repair
Stronger build quality
Better rough terrain capability
We have several of the M.A.N 8x8 trucks operating on the glacier`s in Iceland as a fleet for "Into The Glacier" which is a tour company taking customers up the glacier to the ice cave.
Carrying out all the processes of fabrication through our local specialists means we can make sure that only the best materials are used.
That allows us to keep our standards very high through out the entire fabrication process which results in the highest quality finishes.
The vehicles go through the planning stage, the subframe design and then the body build which takes into account..
Placement of doors and windows
Placement of doors and windows
Location of water and sewage tanks
Best use of space for given area
Incorporation of heating and air conditioning
Location of electrical outlets and equipment
Being able to mould and create any shape has enabled our craftsmen to construct a wide number of bespoke moulds.
Using fibreglass which is also known as GRP (Glass Reinforced Plastic) the moulds created are lightweight, durable and very strong.
Working closely with your idea we can help plan, develop and create your bespoke moulding. The resulting mould can then be installed, tested and finished onsite by our team.
The moulds can also be mass produced which is especially usefull for multiple vehicle orders
The interior of your overlander vehicle is the most important element of the build because it is bespoke to you and your needs.
For many these are a home away from home vehicle, for some they are simply home.
We work together with you to ensure that all aspects of the interior fit are presented to the highest level and standards so that all you need to do is put your final personal touches on it once you take delivery.
The quality of the materials used in the interior fit are of the highest quality and are designed according to your tastes.
From the fabrics to the colour schemes to the inclusion of wood panelling we work closely with you to ensure satisfaction
We can provide everything including the kitchen sink (litterally) with such items as air conditioning, audio visual equipment and the latest in LED lighting to name a few.
The level of finish is always high regardless of budget and spending
We will always go the extra mile to ensure that when we give you the keys that you are completely satisfied with your build.
We can also incorporate a battery managment system to ensure that you don`t get left with no power.
About Chassis MAN CAT A1 8x8
military MAN CAT A1 8x8 15t 8x8 Chassis cab 2.9 and 2.5 mtr was developed by MAN trucks to accommodate loads
with high centres of gravity.
No strategic vehicle is more reliable and long-lived
The A1 series is probably the most mobile and reliable truck on earth. It is primarily deployed as a carrier
for sensitive weapons systems, since its boxed frame structure does not pass on any torsion, even when driving
at full speed in difficult terrain. It is the only truck with a loading interface on which a Patriot system
can be mounted entirely without compromising mobility.
Vehicles in the A1 series are military trucks with strategic importance.
Their rigid axles and boxed frame construction give them an unsurpassed record of mobility and reliability
in any terrain.
It was scheduled for 30 years of use, making it the military vehicle with just about the lowest
lifecycle costs of any in existence.
Could the military MAN CAT A1 8x8 ever get in it up to their neck?
Not a chance, since they are ideally equipped even for deep water.
Without preparation for instance the A1 has a fording depth of
1200 mm in accordance with STANAG 2805. Their service profi le
includes a large ground clearance, very good angles of approach and departure and enormous
permanent climbing capacity (60 %) together with a ditch crossing ability of up to 1.9 m
(depending on the wheel formula), a step climbing ability of 0.6 m
(depending on the tyre size) and a maximum side slope of 40 %.
Last but not least they are designed for climatic zones A1 to C1
according to STANAG 2895, and even with the series equipment
they can withstand extreme outside temperatures from minus 50
to plus 50 degrees Celsius.
A strong basis - the ladder frame.
The body-friendly, low torsion ladder frame of the MAN CAT A1 8x8 is based on
the tried and tested series frame of the civilian TGA range and is
designed for service with a large off road proportion - reliability
built-in. It is made of high-strength, fi ne grain steel and has riveted
and bolted cross members and a steel bumper. Due to the low
torsion frame, comfortable and gentle transport is guaranteed.
The lateral acceleration acting on the platform or body is low.
MAN CAT A1 8x8 Comfortable and robust - the leaf suspension.
Like the frame the suspension has stood the test in many thousands
of MAN vehicles. The leaf suspension further developed for
the A1 & SX with long, wear-free, rubber mounted springs, large shock
absorbers and stabilisers absorb most ground irregularities.
100 % torsional stiffness – the box-type frame.
The extremely torsion resistant box frame with hollow longitudinal
members and welded tubular cross members put the A1 & SX in a
class of its own. With this design the suspension absorbs even
extreme terrain irregularities. The desired consequence: the body
remains unaffected even during fast off-road driving.
First class order: Maintenance and care
The cab can be hydraulically tilted to a position ideal for
work on the engine and gearbox, air drier, solenoid and
ventilation valves. For day-to-day checks the front panel
gives access to the engineoil fi ller neck, containers for the
washer fl uid, brake and other electric connections. The oil
reservoir for the supply of the steering and auxiliary hydraulics
is situated behind the cab. Thanks to the sight glasses the
fl uid level can be checked at a glance. The cab fl oor
can easily be sprayed out with a water hose for cleaning.
Specifications of the MAN CAT A1 8x8 military Chassis cab
Technical Specification of DEUTZ BF8L513 Diesel Engine
Engine model BF8L513FC 360hp / 265(kW)
Inspiration Turbocharged Intercooled
Cylinder 8 in V
Bore /Stroke (mm) 125/130
Displacement (L) 12.763
Rated speed (rpm) 2300
Max torque /speed (N.m/rpm) 1170/1500
Lowest fuel consumption (g/kw.h) 212
Ldile speed r/min 600
Compression Ratio 15.8:1
Continue Power As Per ISO3046/1(kW/rpm) 137/1500 200/2300
Intermittent Power As Per ISO3046/1 (KW/rpm) 210/2300
Highly Intermittent (kw/rpm) 222/2300
Automotive Power As Per ISO1585 235/2300
Max.Torque/Speed (N.M/rpm) 905/1500
Cold Style: Air-cooled
lubrication forced-feed lubrication, 26 l oil
battery 2 x 12 V 125 Ah
generator three-phase generator 24 V 55 A
starter 24 V 6 PS
Load area 7.2m x 2.44m
Load area 1.54m from ground
Ground clearence 0.41m
Max cruise speed 90km/h
Fuel tank capacity 400litres
all wheel drive, distributor locking-differential + locking-differential backwards,
engine in the back of driver`s cab
single-plate dry clutch, hydraulic transformer
transmission 6 speed transmission (ZF S 6-65)
synchronizer I - VI
gear ratio reduction 6.734
Chassis MAN CAT A1 8x8
box-type section frame
front suspension 1 rigid axle, steering, coil springs
rear suspension 1 rigid axle, steering, coil springs
steering system recirculating ball hydraulics
foot brake compressed air-hydraulic dual-circuit brake, 6 wheels
hand brake accumulator, rear wheels
engine brake compressed air
General data MAN CAT A1 8x8 military
wheelbase 1930 + 3670 + 1400 mm
cargo area 7200 x 2440 mm
loading height 1650 mm
tires 14.00 R 20 M /
ground clearance 415 mm
fording depth 1200 mm
turning circle 26.4 m
total weight (perm.) 27200 kg
top speed 90 km/h
fuel tank capacity 400 l
IT CAN BE MADE ONLY BY THE ORDER ON THE BASIS OF THE CHASSIS MAN CAT 8x8!
These are new build appliances made to order and to customer spec
Lead time on orders is currently 3-6 months order to delivery
Featured machines in photos may include additional equipment. The specification do not necessarily show the standard version of the machine.
Ask our manager for available options.
Yard, repair shops and office Address: (BY APPOINTMENT ONLY)
The Rocket Site, Misson, Nr. Bawtry, Doncaster, United Kingdom
09.00 - 17.00 hrs Monday - Friday
Not available on Saturday's or Sunday's
Click for call +44 (0)1302 770485 London Time (GMT) 09.00 - 17.00 hrs Monday - Friday only
Sales & Marketing: David Vitalio, Michael Thompson E-mail: ku.oc.kuymra@yriuqne